Choosing what size connector for your bathroom faucet is a critical step for ensuring a water-tight connection. There are two types of connectors available: the 1/2″ IPS threaded connector and the 1/2″ nominal inside diameter (CTS) slip-on connector. While the former is the most commonly used, you can also find adapters made of copper, PEX, and galvanized steel. These adapters are ideal for plumbing projects, as they make it much easier to connect and disassemble.

Measure the diameter of supply line

To determine the correct size of connector, measure the diameter of the supply line. A standard sink supply line has an outside diameter of 1/2 inch, while a compression fitting has an outside diameter of 3/8 inches. The size of the connector for your bath faucet should match that of your supply line. The length of the tube should be as long as it is wide. Then, you should measure the supply line and choose a compression coupling accordingly.

Buy a new connector

Most new faucets come with wrenches and aerators, which can be used to remove the aerator and reattach the supply line. Keep the other parts and the instruction sheet. Put the parts in a large freezer bag and store them in your sink cabinet. If you want to use your bathroom gold kitchen sink faucet again, you may need to buy a new connector or adapter. Just remember to keep everything in one place.

Before you purchase an adapter, check the dimensions of the supply line. You may need more tubing than you think based on the type of plumbing you have in your home. In most cases, a faucet’s diameter is less than half an inch. Therefore, it is best to purchase a hose that is one and a half inches larger. It is important to get the correct size of the supply line so that you can get the right fit for your faucet.

Install the new bathtub

When you purchase a new faucet, make sure you purchase one with the appropriate length. You’ll need a minimum of an inch extra tubing for the faucet to fit the supply line. To make sure that you have enough tubing for the supply line, you can cut the supply lines using a ratchet-style PVC cutter. Then, you’ll need to install the new bathtub or shower head.

When you purchase a new faucet, be sure to keep the parts in the same place. For example, the supply line size is usually about 1/2 inch. A nut that is half an inch in diameter will fit perfectly into the connector piece. When you install the faucet, you will need to use the appropriate pipe sizes for the sink. In addition, you’ll need to use a different type of connector for the hot and cold handles.